Absorb Microfibre Heavy Duty Mats

A luxurious heavy duty pile made from two types of fibre which combine to give excellent absorption and remove fine dirt particles. 10x more surface area than a standard carpeted mat, Absorb Heavy Duty Microfibre Mats remove and hold onto 34% more water to leave floors dry and reduce slip & falls.

Heavy duty commercial mats are designed to cope with heavy foot fall entrances, such as in schools or retail for example. The high twist PET / microfibre face will resist crushing over time and helps scape and filter dirt to the base of the mat, reducing the chance of it being tracked further into the building.

Available in standard and made to measure sizes up to 1.5m by any length, in three attractive colours. For maximum effectiveness in entrance areas, we recommend you buy the largest mat suitable for your area. The more steps on the mat, the more chance it has of stopping dirt and water.

To order custom sizes, choose ‘Custom Size’ in the Size dropdown box, choose all your other options (Colour, Backing & Border) and boxes will appear beneath the price to enter the measurements you require. The price will automatically calculate.

There are minimum and maximum sizes. Larger sizes cost less/m2 as shown in the Measurement Price Bands displayed.

NB: Due to natural shrinkage in the manufacturing process, there may be a +/- 2% size variation on made-to-measure mats made with borders. The custom size you enter is the size the mat will be made to, which includes the borders. Mats made without borders are cut to your exact size requirement.

They are commercially launderable or can be cleaned with vacuum or carpet extraction methods as needed.

Absorb Heavy Duty Microfibre Mats feature SuperStyrene rubber backing that will not ripple, split, crack or curl even in high footfall areas. There is a choice of backing types to keep the mat in place on hard floors or on carpets.

Choose with or without rubber border. You may prefer to have without border for aesthetic reasons or if you are fitting the mat into a well or recess. Mat well backing uses a thicker 2.5mm dimensionally stable rubber backing.

Ordering to fit in a Mat Well / Recess

Choose ‘Mat Well’ backing and choose ‘No Rubber Border’. Ensure you measure accurately. You may wish to add a little to each dimension, to allow you to trim to size on-site to ensure a snug fit. This is simple to do with a sharp utility knife and steel rule. With the thicker mat well backing the total mat depth is 14.2mm and is suitable for use in mat wells of depth 11-14mm.

Delivery timescale

All Absorb Microfibre Heavy Duty Mats are custom made to order and delivered in approximately 2 weeks. We will notify you on despatch and provide full tracking information.

Features & Benefits:

• Heavy duty mats with a wide range of sizes and colours
• Twisted fibres filter dirt into the lower part of the mat where it is held until cleaning
• Twisted pile will ‘bounce back’ to prevent crushing of the mat surface over time
• Excellent absorption properties (34% more than standard mats) to remove moisture, dirt and dust from footwear
• 10 times surface area of standard carpeted mats to remove more dirt and moisture
• Extremely stain resistant and simple to clean or machine wash
• Anti-slip SuperStyrene rubber backing
• Choice of backing to prevent mat movement once positioned
  • Flat backing for hard floors
  • Claw backing for carpeted floors

How does this mat improve health and safety?

• National Floor Safety Institute (NFSI) Certification for slip resistance
• Provides a safe, non-slip walking surface
• Stops dirt and water which reduces slip and fall accidents
• Removes dust which can negatively affect air quality
• Low profile edges minimise trip hazards
• Non-slip rubber backing helps prevent mats from moving

Absorb Heavy Duty Microfibre Mats are recommended for:

• High traffic entrances
• Corridors, runs and walkways
• Vending machines and water butts
• Offices
• Schools
• Retail
• Hotels and Leisure
• Commercial buildings
• Domestic usage